Extend the flexibility of your Portalift system with purpose-built stands, adaptors, cable management and protective equipment for heavy-vehicle workshop use.
| Range | Visitor-facing positioning | Published details to feature |
|---|---|---|
|
Vehicle stands |
Support a raised vehicle at a set height so columns can be released for other lifting work, while improving access around wheels and tyre assemblies |
Tall and short stand options; adjustable screw heads; custom heights and capacities available from manufacturer. |
|
A-frame trailer adaptor |
A specialist Portalift accessory for suitable trailer lifting applications. |
Published 12 tonne capacity; 89
mm and 111 mm kingpin sizes. |
|
A-frame trailSmall wheel adaptorser adaptor |
Allow suitable smaller-wheel vehicles to interface with the Portalift lifting carriage. |
Published wheel range 575-775 mm; minimum 15 inch rims; 2 tonne capacity when used as a pair; 10 kg tare. |
|
Cable management system |
Keeps Portalift power cables raised and organised around the work bay. |
Integrated 3-pin system; can be integrated into new or existing Portalift designs according to manufacturer. |
|
Hoist & gearbox covers |
Protect the motor, gearbox and posts when additional environmental protection is desirable. |
Manufacturer describes custom durable PVC covers for Portalift components. |
|
Custom engineered support |
For workshops with non-standard ehicles, wheel sizes, heights or handling requirements. |
Only offer after application review and manufacturer confirmation. |
Endurequip small wheel adaptors fit over the lifting carriage to suit selected smaller-wheel vehicles. The manufacturer currently publishes a wheel range of 575 mm to 775 mm, with a minimum 15 inch rim and a 2 tonne capacity when used as a pair.
Portalift is a wired lifting system. Endurequip offers a cable management system designed to raise and organise the power cables around the bay, helping workshops maintain a cleaner working area without moving to battery-powered columns
Portalift is a wired lifting system. Endurequip offers a cable management system designed
to raise and organise the power cables around the bay, helping workshops maintain a cleaner working area without moving to battery-powered columns.
| Your requirement | Recommended path |
|---|---|
|
Need to support a raised vehicle and reuse the columns |
Vehicle stands |
|
Need to lift suitable trailers |
A-frame trailer adaptor |
|
Need to lift selected smaller-wheel vehicles |
Small wheel adaptors |
|
Need better cable organisation |
Cable management system |
|
Need added post / gearbox protection |
Hoist and gearbox covers |
|
Have an unusual vehicle or workshop requirement |
Custom engineered enquiry |
Vehicle stands are designed to support a vehicle at a set height, which can allow the columns to be reused where
the correct stand capacity, support points and work procedure are followed.
The manufacturer currently publishes a 575 mm to 775 mm wheel range with a minimum 15 inch rim.
Endurequip currently publishes a 12 tonne lifting capacity and 89 mm or 111 mm kingpin sizes.
Endurequip states its cable management system can be integrated into existing or new Portalift designs, subject
to the specific system and site.
Yes. Send the Portalift details, vehicle information and photos so the application can be reviewed before supply.
